LT Security LTD7604JM - Manual (Page 8)

5 DVR menu introduction
5.1 Menu Introduction
Press “MENU” to enter menu setting;
Press “ UP” and “ DOWN” to move
the cursor;
Press “ EDIT” to enter setting;
Press “MENU” to confirm and enter.
Display channel 1234
Video channel 1234
Record mode 4
Record frame rate 25
Video quality 3
Setting Record setting
System setting
HDD setting
Motion detection setting
System …………..PAL
System reset
5.2 Set display channel
System can play four channel cameras at the same time (Quad). User can set any
camera on /off in “Display” of the menu. Press “ EDIT” will change former
setting, and press “CH1”, “CH2”, “CH3”, “CH4” to select single channel in full screen
display. If the camera is not connected, system will show “OFF” in the screen.
5.3 Set video
In Video setting menu, press “ EDIT” to change original setting. User can
select “CH1”, “CH2”, “CH3”, “CH4” to set any channel’s video record.