LT Security LTD7726 - Manual (Page 44)

44
4.2 HDD INSTALLATION
Caution: When working with electrostatic sensitive devices such as hard disk drive or DVR
unit, make sure you use a static-free workstation. Any electrostatic energy coming in contact
with the hard disk drive or DVR can damage it permanently.
Please install the HDD with the following steps:
1）Open the cover of the DVR and you will see one HDD plate as follow:
2）Connect HDD cables as follow:
.
3）Secure HDD onto HDD plate as indicated below with the screws provided:
4）Install the HDD plate back into DVR and close cover.
Notice: New installed HDD must be formatted before recording.