LT Security LTN7732-P8 Platinum Setup Guide - Manual (Page 4)

http://www. lts ecurityinc.com/  ▲  A u t h o r – R y a n D L a n g 4 | P a g e
Scanning & Adding IP Cameras
1-Click Camera Adding
As of the December 2013 firmware update, the NVRs can quickly add
all cameras with a single click. The NVR will scan for, assign addresses
to, and add cameras. The button is on the toolbar at the bottom of the
screen (right click to display).
The NVR will show the cameras that it found and added.
Single Camera Adding
The NVR has built-in tools to scan for and add the IP cameras
individually. The tool is located under:
Menu > Camera > Camera
Click on the plus sign (+) to add a camera. The camera will be given a
free IP address.
Warning
Make sure the NVR has an IP address on the local network.
! !