LT Security LTN7732-P8 Platinum Web Guide - Manual (Page 11)

http://www. lts ecurityinc.com/ Menu 11 | P a g e
Entering the DDNS
Once the DDNS address is created, it can be entered into the
NVR/DVR. The DDNS settings are under:
Configuration > Network Settings > DDNS
Click the check box next to Enable
Device Domain Name is the address just created.
User Name is the installer’s e-mail address.
Password is for the DDNS account created.
Confirm is the DDNS password again.
The password is not the e-mail account password.
The default DDNS type is “LTS” and the default server is
“ns1.dvrlists.com” (our server). Leave this information alone.
Click “Test” to make sure the information has been entered correctly.
Troubleshooting
If the test fails, check the information. If it is correct, check the DNS
status. If no address has been set to the DNS, set it to: 8.8.8.8
(Googles DNS server).
Please note that DDNS and DNS are separate things.
The DVR/NVR needs a DNS to use the address of the DDNS server.
Every web address has a number attached to it. The words are for
humans; the numbers are for machines. The DNS translates the
human-readable site into machine-readable numbers.
How It Works
A DDNS will keep track of dynamically changing router IP addresses.
The NVR will “check-in” with an LTS server, telling it what its current IP
address is. Our DDNS server will then update the address created for
the customer by the installer.
Tip:
Copy and paste the “Domain” and “User Name” fields from the
account page to the configuration page to prevent typos.