LT Security LTD7904 User Manual
Page 37
31
Digital Video Recorder User Manual
Step1: enter into system configuration
alarm configuration
schedule; refer to Fig 4-25:
Step2: the setup steps of alarm schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details.
4.5.3 Video loss
Step1: enter into system configuration
alarm configuration
video loss; refer to Fig 4-26:
Step2: the setup steps of video loss trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor
alarm
handling for more details.
Step3: user can also setup all channels with same parameters.
Step4: click “apply” button to save the setting; click “exit” button to exit current interface.
Fig4-25 alarm configuration-schedule Fig 4-26 alarm configuration-video loss
4.5.4 Other alarm
Step1: enter into system configuration
other alarm; refer to Fig 4-27:
Disk full: user can choose the capacity of the disk storage and select the related alarm. If the disk is full, the system will alarm
according to the setup.
IP conflict: if there is an IP address conflict within the same network, the device will alarm after user selects buzzer and the
channel to alarm out.
Disconnect: if the disconnect happens, the device will the device will alarm after the user selects buzzer and the channel to
alarm out.