LT Security LTD2408-2416 - Manual (Page 49)

Digital Video Recorder User Manual
43
3.6 PTZ Control
Please connect speed domes to the DVR via RS485 first, referring to 2.3.1 Rear Panel Interface. In addition, make sure
the speed dome has the protocols this DVR supports and set the parameters according to its manual.
STEP1
Press right mouse to show the control bar. Enter Menu---->System--->P.T.Z, see Fig 3.25.
Fig 3.25 PTZ Setup
STEP2 Set protocol, baud rate, address according to the parameters of the speed dome.
STEP3 Click Set button at right of Preset. Here users can set presets as Fig 3.26 Set Presets. Adjust the speed dome.
Select a preset and click Save to a preset. Users can set 128 presets totally.