LumaSense Technologies ISR 6 Advanced User Manual
LumaSense Technologies Tools
Advertising
Table of contents
Document Outline
- 1 General Information
- 2 Introduction
- 3 Controls and Installation
- 4 Settings / parameter descriptions
- 4.1 Temperature Display
- 4.2 Emissivity ε
- 4.3 Emissivity Slope K
- 4.4 Transmittance
- 4.5 Response Time (t90)
- 4.6 Clear Peak Memory (tCLEAR)
- 4.7 Analog Output
- 4.8 Relative Signal Strength
- 4.9 “Dirty Window” Warning
- 4.10 Minimum Intensity Switch-Off Level
- 4.12 Sub Range
- 4.13 Device Address
- 4.14 Focused Distance
- 4.15 Baud Rate
- 4.16 Pyrometer Internal Temperature
- 5 Software InfraWin
- 5.1 Connecting the pyrometer to a PC
- 5.2 Installation
- 5.3 Program start
- 5.4 Basic settings
- 5.5 Relative Signal
- 5.6 Warning Level / Switch-Off Level
- 5.7 Emissivity Slope K: AutoFind
- 5.8 Measurement online trend
- 5.9 Listing (analyzing)
- 5.10 Output .TXT file (analyzing)
- 5.11 Trend output (analyzing)
- 5.12 PC sampling rate (time interval between two measurements)
- 5.13 Spot size calculator
- 5.14 Search I/O Module
- 6 Maintenance
- 7 Data format UPP( (Universal Pyrometer Protocol)
- 8 Reference Numbers
- 9 Troubleshooting
- Index