LumaSense Technologies Pearl OEM Quick Start Guide User Manual
Introduction, Unpacking and inspection, Connecting the cameras
Pearl Quick Start Guide
Introduction
The Pearl Camera is
a flexible platform to
support a variety of
infrared imaging appli-
cations. The standard
output is NTSC video.
The Pearl Camera prod-
uct is suited for applica-
tions requiring high quality infrared imaging without the
added cost of precision radiometry.
The Pearl Control Software is designed to allow users to
control the Pearl OEM camera or camera core. Users can
adjust video settings, capture images, and use the software
to assist in calibration. Pearl Control software is provided
on a disc in the case and is shipped with the camera.
Pearl OEM Camera
The Pearl OEM Camera is a fully enclosed thermal imag-
ing camera designed to operate with LumaSense
IR detectors with external connectors. The product is also
offered in an optimized midwave configuration for high
temperature and see-through flame applications.
Pearl Camera Core
The Pearl Camera Core includes a three-board electronics
stack with detector mounting assembly, but it does not
have an enclosure. The design is portable among pro-
grammable hardware manufacturers and can be inte-
grated into new or existing designs.
Unpacking and Inspection
When unpacking and inspecting your system compo-
nents, complete the following:
1. Upon receipt, inspect the containers in which the
instruments are packaged prior to opening to ensure
there is no obvious damage that may have occurred
during shipping. If there is reason to suspect that the
contents were damaged in shipping, immediately file
a claim with the carrier before contacting Luma-
Sense.
2. Open the shipping containers and carefully remove
the instruments and accessories.
3. Check the contents against the enclosed packing list
and inspect for signs of visible damage. If any items
are missing or if there is visible damage to the instru-
ments, contact Customer Care (Santa Clara, CA):
Email:
Phone:
+1 800 631 0176 or +1 408 727 1600
4. If everything is in order, save the packing material for
possible future use.
Connecting the Cameras
The Pearl cameras have connectors for power, video, and an
RS232 interface. Connections vary based on configuration.
Standard OEM Camera Configuration
Standard Pearl Core Configuration
Standard Configurations
RS232 connection
Video connection
Power & optional
video connection
Power & video
connection
RS232/Data
connector