Mediabridge MUA-BA3 Windows XP - Manual (Page 23)

NOTE:
• Only one Bluetooth adapter can be active at a time.
•
If you disable the active adapter or change its status to inactive, you must redo pairing with
the other Bluetooth enabled devices.
To query the active adapter and update the data displayed in Device properties:
• On the Diagnostics tab, click Refresh.
To disable or enable a particular Bluetooth adapter:
• On the Diagnostics tab, click the name of the adapter, and then click either Disable or Enable.
To specify which Bluetooth radio device you prefer to use:
• On the Diagnostics tab, click the name of the adapter, and then click Set Preferred.
NOTE:
•
If you enable a Bluetooth adapter, and another Bluetooth adapter is set as Active (Preferred),
the status of the enabled adapter is automatically set to Inactive, which means that it is
available for use, but it is not the preferred adapter.
•
If you enable a Bluetooth adapter, and no other Bluetooth adapter has been set to Active
(Preferred), the status of the enabled adapter is automatically set to Active.
•
When a Bluetooth adapter is plugged in or unplugged while Bluetooth Configuration is
open, click Refresh to update the displayed information.
• If you do not intend to use an adapter, you can disable it to conserve battery power.