RIKON Power Tools 10-600VS - Manual (Page 8)

8
B. Saw-blade with pins (Fig . 08 )
B-1 Saw blade removal
• Extract the saw-blade by fi rst unscrewing the tight-
ening screw (2).
• Remove the saw-blade from the upper and lower
support by
slightly pressing the saw’s upper arm down (5).
B-2 Inserting the saw-blade
• Lead one end of the saw-blade through the perfora-
tion
in the table and insert the saw-blade pins into the
notch.
Repeat this procedure at the upper blade support.
• Before hooking it in, slightly press the saw’s upper
arm down (5)
• Check the position of the blade pins at the supports
(6).
• Tighten the blade by means of the tightening screw
(2).
Check the blade’s tightness.
Keep on rotating clockwise in order to tighten the
blade even more.
Fig. 08