RIKON Power Tools 30-140 - Manual (Page 12)

B
A
12
Figure 23
TABLE ADJUSTMENTS
Raising and Lowering the Table
1. Loosen the column lock (A-Fig.23) on the table
support bracket (B-Fig.23).
2. Turn the crank to raise or lower the table to the
desired height.
3. Tighten the column lock (A-Fig.23).
The table can rotate 360 o by loosening the table lock
handle and turning to the desired position. (Fig. 24)
CHANGING SPINDLE SPEEDS
Figure 24
WARNING!
Figure 25
B
A
1. Turn off and disconnect the power to the Drill
Press.
2. Open belt cover.
3. Release the tension on the belt by loosening the
belt tension lock (A-Fig.25) and pull forward on
the motor (B-Fig. 25).
4. Choose the desired speed by referring to the
speed selection chart.
Disconnect machine from the power
source.