Aquatica Nikon AD80 - Manual (Page 2)

FOREWORD
T
hank you for having selected the AQUATICA Pro Digital Camera Housing System
for your underwater photography.
The AQUATICA Pro Digital Housing is the result of a long and continuing relationship with the most demanding underwater
photographers in the world. Each housing is handcrafted, quality checked and pressure tested to 300 feet by a small group of
specially trained individuals, each of whom takes the utmost pride and satisfaction in offering the best underwater camera housing
in the world.
The Aquatica Pro Digital Housing was designed for optimum technical and optical performance and to provide easy and efficient
underwater access to essantials functions and controls of the Nikon D80 DSLR.
This manual assumes that the User is already familiar with the Nikon D80. If not, please read the Nikon instruction Manual before
attempting to use the housing.
With basic care and maintenance, your AQUATICA housing will give you a lifetime of enjoyment and satisfaction in
producing underwater images.
Please read this manual carefully before using your housing for the first time and note that: wherever cited the right hand is your
right when using the housing.
SAFETY PRECAUTIONS
Improper transportation handling or use of this housing might cause a flood or malfunction.
Please read and follow the following precautions:
• Store and transport the housing in a sturdy, shock proof container and avoid travelling with the camera mounted inside the housing
as impact forces especially on the external push buttons will be transferred to the camera.
• When travelling by air, either remove the port or open the housing.
• Never change a port or open the housing in a location where sand or similar foreign material might come in contact with an O-ring.
• Use of accessories or modifications and alterations unauthorized by the manufacturer may result in flooding or poor functioning of
the controls
• Be careful when opening the housing as the pressure buildup inside the housing will exaggerate the force of the latch spring. Keep
fingers away from the path of the latches.
• Whenever changing ports or O-rings, perform a simple seal test with out the camera inside.
• Avoid scratching the acrylic or glass ports and windows.
• Make sure that all ports remain properly attached before rinsing the housing, especially when rinsing without a strobe make sure
the Bulkhead connector is sealed with its plug.
• Never attempt to operate the camera in autofocus mode with the lens mounted focus gear engaged with the housing gear.
• The main O-ring seals should be maintained and cleaned on a regular basis. Read and follow the Care and maintenance instructions
on this manual.
• Ensure that the spring loaded secondary lock is properly engaged to prevent the accidental opening of latches.