RIKON Power Tools 61-200 - Manual (Page 7)

7
1. Remove all packing and hardware from
inside of the unit by removing the outer
filter and inner filters.
2. The air filtration unit can be hung from
the ceiling. Hang the unit using four
eyebolts (A, Fig.01).
Four angle brackets can also be used for
mounting to the ceiling, or wall.
1. Place one end of bracket underneath
the lip of the cabinet.
2. Attach the bracket (A, Fig.02) with two
hex cap screws (B, Fig.02) and two
lock washers (C, Fig.02).
3. Repeat steps for remaining three
brackets.
Fig.01
Fig.02
Fig.03
Assembly
! !
WARNING
Mounts must be anchored to building
structure, which will support a minimum of
at least 100 pounds. Never mount to
surfaces such as dry wall or false ceiling
grids, etc.
1. Locate hardware to install the filter
clips.
2. Slide spring onto threaded portion
of knob and screw into the side of the
cabinet (Fig.03).
3. Pull back spring and slide filter clip
between spring and cabinet.(Fig.03).
A
A
B
C