RIKON Power Tools 63-100 - Manual (Page 6)

6
The machine must not be plugged in and the power switch must be in the OFF position
until assembly is complete.
Getting to Know Your Dust Extractor
Assembly
1
2 3
4
5
6
7
8
9
10
11
12
13
14
Item Description
+DQGZKHHO
+HDGVWRFN
3 Face plate
4 Spur center
5 Tool rest
6 Live center
7 Tailstock
Item Description
8 Tailstock handwheel
9 Switch
10 Tool rest seat locking lever
11 Tailstock locking lever
12 Tailstock spindle locking arm
13 Tool rest base
14 Motor
Unpacking and Clean-up
 &DUHIXOO\¿QLVKUHPRYLQJDOOFRQWHQWVIURPVKLSSLQJFDUWRQ&RPSDUHFRQWHQWVRIWKH
shipping carton with the list of contents above. Place parts on a protected surface.
2. Report any shipping damage to your local distributor.
3. Clean all rust protected surfaces. Do not use; gasoline, paint thinner, mineral spirits,
etc. These may damage painted surfaces.
4. Set packing material and shipping carton to the side. Do not discard until machine
has been set up and is running properly.
Tools Required for Assembly
Item Description
Slotted Screwdriver
Show RIKON Dust Extractor
Show RIKON Dust Extractor
Show RIKON Dust Extractor
1
2
3
4
5
6
Item
1
2
3
Description
Motor switch
Motor cover
Body
Item
4
5
6
Description
Dust hose
Dust inlet
Band-strap Clamp