SANDPIPER G05 - Manual (Page 17)

Intermediate Repair Parts List
Item Part Number Description Qty
4 114-023-157 Bracket, Intermediate 1
7 135-036-506 Bushing, Plunger 2
26 560-001-360 O-Ring 2
560-001-363 O-Ring (FKM) 2
30 620-019-115 Plunger, Actuator 2
31 675-042-115 Ring, Retaining* 2
*NOTE: It is recommended that when plunger components are serviced, new retaining
rings be installed.
7
31
26
4
26
7
31
30
30
g05mdl1sm-rev0614
sandpiperpump
.
com Model G05 Metallic •
14
Pilot Valve Assembly Intermediate Assembly
Intermediate Assembly Drawing
Step 1: Remove plunger, actuator (30) from center of
intermediate pilot valve cavity.
Step 2: Remove Ring, Retaining (31), discard.
Step 3: Remove bushing, plunger (7), inspect for wear
and replace if necessary with genuine parts.
Step 4: Remove O-Ring (26), inspect for wear and
replace if necessary with genuine parts.
Step 5: Lightly lubricate O-Ring (26) and insert into
intermediate.
Step 6: Reassemble in reverse order.
IMPORTANT
When the pumped product source is at a higher
level than the pump (flooded suction condition),
pipe the exhaust higher than the product source
to prevent siphoning spills. In the event of a
diaphragm failure a complete rebuild of the
center section is recommended.
LEGEND:
= Items contained within Gas End Kits
MODEL SPECIFIC
4: AIR
END