SANDPIPER PB2-A - Manual (Page 8)

WARREN RUPP, INC. A Unit of IDEX Corporation • P.O. Box 1568 • Mansfield, Ohio 44901-1568 USA • (419) 524-8388 • Fax (419) 522-7867
520-130-000 2/97 Model PB1½-A & PB2-A Page 8
© 1995 Warren Rupp, Inc. All rights reserved.
® SandPIPER is a registered tradename of Warren Rupp, Inc.
Printed in U.S.A.
*Item 63 comes in 32-inch
lengths. Install in groove on
outer chamber, Item 38 and
trim accordingly. Item 63
goes into the groove at
inside of the tapered casting
sealing bead overlapping
the bead by approximately
1/16 of an inch with the 1/4"
gasket cord stock.