Seca 762 - Manual (Page 30)

30 •
Avoiding damage to the
device
NOTICE!
Damage to device
• Make sure not to drop the device.
• Do not expose the device to any impact or
vibration.
• Perform function controls regularly as
described in the relevant section in this
document. Do not operate the device if it is
damaged or not working properly.
• Caustic detergents may damage the surfaces.
Only use a soft cloth dampened with mild
soapsuds to clean the surfaces of the device.
• Only use disinfectants suitable for sensitive
surfaces. Suitable disinfectants are available
from specialist dealers.
Handling the
measurement results
WARNING!
Patient hazard
This device is no diagnostic device. It simply
assists the treating physician in establishing a
diagnosis.
– In order to make a precise diagnosis and ini-
tiate therapeutic measures, besides determi-
nation of the weight, further targeted
examinations must be set up by the physi-
cian, and their results must be considered.
– The responsibility for diagnosis and treatment
lies with the treating physician.
CAUTION!
Patient hazard
In order to avoid misinterpretations, test results
for medical use must be displayed and used in
SI units (weight: kilograms, length: metres) only.
– Use the results exclusively in SI units.
– The use of measurement results in non-SI
units is the sole responsibility of the user.
– If your scale is unable to display SI units, you
can use the conversion tool in this document.