Seca 264 - Manual (Page 72)

72 •
4. Select the correct year.
5. Confirm the selection.
6. Repeat steps 3. and 4. as appropriate for month
( ), day (
day
), hour (
hour
) and minute ( ).
7. Confirm your selection each time.
After confirming your setting for minute, the
program automatically exits the menu.
The settings are automatically transmitted to the
wireless printer.
The wireless printer automatically adds the date
and time to every printout.
NOTE
For further operation of the wireless printer, see
its user manual.
7. CLEANING
Use a standard household cleaner or disinfectant to
clean the surfaces of the device as required. Take note
of the instructions provided by the manufacturer.
8. WHAT TO DO IF …?
8.1 Faults and their correction
Malfunction Cause/Remedy
… a segment lights up
continuously or not at
all?
There is a fault at that point.
- seca notify the service department.
...the background
lighting of the display
goes out at the head
slide and cannot be
switched back on?
Battery voltage is falling off. The background
lighting has been automatically switched off to
save energy. You can take measurements and
transmit data for another approx. 12 h.
- Insert new batteries as soon as possible (see
“Change the batteries of the head slide” on
page 74).
… is displayed?
Battery voltage is falling off.
- Insert new batteries as soon as possible (see
“Change the batteries of the head slide” on
page 74).
…
bAtt
is displayed?
Batteries are flat.
- Insert new batteries (see “Change the
batteries of the head slide” on page 74)