Seca 285 - Manual (Page 106)

106 •
6. To disable the "ZERO" function, keep the arrow key
(hold/zero) pressed until the "ZERO" message is
no longer displayed.
NOTE
If, for documentation purposes, you send
results of relative measurements to devices
which automatically calculate the BMI or BFR,
no plausible values result for these two
parameters.
Transmit measured
results to wireless
receivers
If the head slide is integrated in a wireless network, you
can transmit the measured results to receive-ready
devices (scales with BMI function, wireless printer, PC
with USB wireless module) at the touch of a button.
• Press the Enter key (send/print).
– Press key briefly: send measured results to all
receive-ready devices
– Hold down: Print measured results
Switch off head slide • Press the Start key of the head slide.
NOTE
The head slide switches off automatically after a
short time if it is not moved.