Operate scales, 1 weigh, Start weighing – Seca 285 User Manual
Page 89: Weigh babies/toddlers (2 in 1)
Operate scales • 89
English
6. OPERATE SCALES
6.1
Weigh
Start weighing
1. Ensure that there is no load on the scales.
2. Press the Start key
of the multifunctional
display.
se[A
appears on the display, and then all the
display's elements appear briefly.
The scales are operational when the display reads
0.00
.
3. Ask the patient to step onto the scales.
The patient's weight is displayed.
4. Read off the measured result.
Weigh babies/toddlers
(2 in 1)
You can use the 2 in 1 function to weigh babies and
toddlers. Here the child is held by an adult during
weighing. Proceed as follows.
1. Ensure that there is no load on the scales.
2. Press the Start key
of the multifunctional
display.
3. Ask the adult to step onto the scales.
The adult's weight is displayed.
4. Press the 2 in 1 key.
The weight is saved.
0.00
, the
symbol (non-calibratable function) and
the NET message appear in the display.