Seca 285 - Manual (Page 93)

Operate scales • 93
English
NOTE
If the Autohold function is activated, the weight
value is automatically displayed continuously as
soon as a stable measured result is achieved .
(see “Activate Autohold function (AHold)” on
page 101).
5. Measure the height of the patient using the head
slide (see “Start measuring height” on page 104).
6. Briefly press the Enter key send/print (see
“Transmit measured results to wireless receivers”
on page 106).
The height received is displayed on the
multifunctional display.
BMI is calculated and displayed automatically.
NOTE
If the head slide should ever fail, height can also
be entered in the multifunctional display
manually (see “Enter height manually (HGHt)” on
page 100).
7. Transmit the measured results to a receiver from
the seca 360° wireless system:
– to PCs with USB wireless adapter: send key
– to seca wireless printers: print key
8. Ask the patient to step off the measuring station.
9. Press the clear key.
Patient data, height and BMI are deleted. This
prevents out-of-date data leading to a faulty BMI for
the next patient.
NOTE
If the “Autoclear” function is activated, height
and BFR are deleted automatically after 5
minutes (see “Delete values automatically (AClr)”
on page 98).
Determine Body Fat
Rate (BFR)
The Body Fat Rate puts height, weight and gender in
relation to one another. It includes a tolerance range
which is considered ideal in health terms.
1. Press the Start key of the multifunctional
display and the head slide.
2. Ensure that the calculation method “BFR” is set on
the multifunctional display (see “Switch between
BMI and BFR (body)” on page 99)