Seca Analitics 115 - Manual (Page 30)

30 •
Deleting individual
patient files
You can delete patient files in both the main patient list
and the patient list of the USB stick. To do so, proceed
as follows:
1. Select the patient file that should be deleted (here:
in main patient list).
2. Click the appropriate checkbox
A cross appears in the checkbox.
The patient file is selected.
3. Repeat the steps 1. and 2. for all patient files that
should be deleted.
4. Click on Delete .
The patient file is deleted.
ATTENTION!
Loss of data
If you delete data from the USB stick, it cannot
be restored.
– Before deleting data from the USB stick,
check that the data has been imported to the
main patient list (see “Importing patient files
from the USB stick” on page 26).
NOTE:
Should you unintentionally delete data in the
main patient list, your administrator can restore
the data with the function
Restore patient data .
The entire patient data record will be restored.
Entries and measurements that were not saved
are lost.