2 tire pressure, 3 tractor requirements, 4 tire torque – Seed Hawk TOOLBAR 2013 45 & XL SERIES User Manual

Page 20

Advertising
background image

SEED HAWK® TOOLBAR OPERATOR’S MANUAL 

 20 




3.1.4 TIRE TORQUE 

 
Tire Size 

 
Description 

 

Torque N∙m (lb‐ft) 

11 L 15 SL STUBBLE PROOF 

Wing Castor (Front and Rear) 

203 (150) 

11 L 15 HIGHWAY 

Main Frame Castor  (Front) 

203 (150) 

19.0 / 45 x 17 

Main Frame Castor (Front) 

203 (150) 

500 / 45 x 22.5 

Rear Axle Tire 

271 (200) 

30.5 L 32 SAT (Single) 

Rear Axle Tire 

475 (350) 

30.5 L 32 SAT (Inner Dual) 

Rear Axle Tire 

475 (350) 

30.5 L 32 SAT (Outer Dual) 

Rear Axle Tire 

475 (350) 

3.2 TIRE PRESSURE 

Use the following chart to check and adjust, if necessary, tire pressure. 

Tire Size 

Description 

PSI Rating 

480 x 400 x 8 

Packer Tire 

14‐16 PSI 

11 L 15 SL STUBBLE PROOF 

Wing Castor (Front and Rear) 

58 PSI 

11 L 15 HIGHWAY 

Main Frame Castor  (Front) 

76 PSI 

19.0 / 45 x 17 

Front Main Frame Castor 

58 PSI 

500 / 45 x 22.5 

Rear Axle Tire 

52 PSI 

30.5 L 32 SAT (Single) 

Rear Axle Tire 

26 PSI 

30.5 L 32 SAT (Inner Dual) 

Rear Axle Tire 

26 PSI 

30.5 L 32 SAT (Outer Dual) 

Rear Axle Tire 

16 PSI 

 
NOTE
:  Proper inflation of tire pressure contributes to longer tire life and proper flotation for 
field  operations.    Tire  inflation  pressures  listed  are  recommended  initial  settings.    Some  soil 
conditions  and  operating  environments  may  dictate  deviation      (on  Pneumatic  Packer  Tires 
Only) from the recommended settings. 

 

3.3 TRACTOR REQUIREMENTS 

 

TRACTOR HYDRAULIC CIRCUIT REQUIREMENTS 

CIRCUIT #1 

SHANKN LIFT/LOWER 

INTERMITTENT 

<40’ (12.2 m) 

Flow Rate 

2‐3 gal‐US/min (7.6‐11.3L/min) 

40’+ (12.2 m) 

Flow Rate 

3‐4 gal‐US/min (11.3‐18.9 L/min) 

CIRCUIT #2 

SHANKN LIFT/LOWER 

CONTINUOUS 

Model: SH Toolbar 

Flow Rate 

3‐4 gal‐US/min (11.3‐18.9 L/min) 

SBR Hitch (option) 

Flow Rate 

2‐3 gal‐US/min (7.6‐11.3L/min) 

Low Pressure Tank Lin(s) 

Tractor Reservoir 

3‐5 gal‐US/min (11.3‐18.9L/min) 

MAX hydraulic system pressure should not exceed 3000 PSI.  Contact dealer if tractor exceeds 
3000 PSI 

Advertising