Seed Hawk 30 SERIES: 600C & 800C 2013 User Manual

Page 18

Advertising
background image

SEED HAWK® 30 SERIES OPERATOR’S MANUAL 

 18 




2.9.2  WARNINGS & MANDATORY INSTRUCTION DEFINITIONS ‐ EUROPE 


A  Carefully read the instructions and make sure you understand their meaning. 
 
B    Make  sure  the  whole  of  the  working  area  and  area  for  folding  out  the  sections  are  clear! 
Never  walk  under  a  suspended  section!  Always  check  that  the  automatic  stops  have  been 
locked during transport and parking. 
 
C  Do not stand between the tractor and the machine when the tractor is reversed to hitch the 
seed drill. 
 
 Warning tape, watch out for the risk of crushing or impact, also used on safety‐related parts. 
 
E  Watch your feet, risk of pinching.  
 
 Always make sure that the working area of the bout markers is free from obstructions! Keep 
in mind that there is a risk of injury when the bout markers are extended and there is a risk of 
crushing between the seed drill and the bout markers when they are retracted. NOTE!The bout 
markers are always retracted when the machine is lifted, regardless of the indications on the 
LOUP  III  monitor.    The  indicated  bout  markers  are  always  extended  when  the  machine  is 
lowered.  Therefore, when the machine is not in the field, always lock the bout markers with 
the catches and switch off the LOUP III monitor.  The LOUP III monitor stores all settings and 
values in memory when it is switched off. 
 
G  Do not climb on to the seed drill unit packer wheels when the machine is parked, as they can 
rotate.  
 
H  Make sure nobody is on the seed drill when it is moving. 
 
 Make sure nobody is on the seed drill when loading seed. 
 
J    The  ladder  and  platform  on  the  machine  are  not  intended  to  be  used  for  manual  loading 
from small sacks. 
 
K  Warning of piercing oil jet; the hydraulic system is  pressurised. Before performing servicing 
or repairs, the hydraulic system pressure must be released. 
 
L  Following 10‐15 km of transport on the road, re‐tighten the wheel nuts. Re‐tighten the nuts 
similarly  after  changing  wheels.  Tighten  the  nuts  using  a  torque  wrench.  SEE  “3.1  FASTENER 
TOUQUE” ON PAGE 24. 
 
M  Use ear defenders when adjacent to the running fan. 


Advertising