Seed Hawk TOOLBAR 2011 - Manual (Page 50)

Seed Hawk Manual Tool Bar Page 45
7.3 CASTER WHEEL GREASE FITTINGS
Lubricate two (2) fittings, #1 Figure 26, every 50 hrs or weekly.
NOTE: One fitting is on top and the other on the bottom of the caster wheel plate.
7.4 CASTER WHEEL PLATE GAP
Measure gap between caster wheel plates every 100 hrs. The gap, “X”, should not
exceed 1/8” (3 mm), Figure 26. Adjust gap, if necessary, by tightening bolt on top
of caster wheel plate assembly.
7.5 REAR WHEEL STEERING GREASE FITTINGS
Lubricate Rear Wheel Steering grease fittings every 25 hrs. There are two (2)
grease fittings, both are on the top and on each box pivot pin, Figure 27.
1
X
1
Figure 26
Figure 27