Seed Hawk TOOLBAR 2009 - Manual (Page 49)

Seed Hawk Manual Tool Bar Page 46
FIG.23
FIG.25
7.3 CASTER WHEEL GREASE FITTINGS
Lubricate two (2) fittings, #1 FIG. 23, every 50 hrs or weekly.
NOTE: One fitting is on top and the other on the bottom of the
caster wheel plate.
7.4 CASTER WHEEL PLATE GAP
Measure gap between caster wheel plates every 100 hrs. The gap, “X”, should not
exceed 1/8” (3 mm), FIG. 24. Adjust gap, if necessary, by tightening bolt on top of
caster wheel plate assembly.
7.5 REAR WHEEL STEERING GREASE FITTINGS
Lubricate Rear Wheel Steering
grease fittings every 25 hrs. There
are five (5) fittings, one (1) on top
and four (4) on the bottom, FIG.
25.
1
X