SHARKOON Tactix - Manual (Page 10)

TACTIX 10
8.3.8 Profile switch
Each key can be defined as switch between the single profiles:
1. Select “Profile Switch” from the dropdown menu (see 8.3). The following window will appear:
2. Select the desired profile and layer, which will be activated after pressing the key, using the arrow
buttons. Click inside the check box in front of “On Screen Display (OSD)”, the OSD will be displayed on
the
screen.
3. Click “OK” to confirm your selection or “Cancel” to discard it.
8.3.9 Additional functions
Each key can be defined as switch between the single profiles:
1. Select “Profile Switch” from the dropdown menu (see 8.3). The following window will appear:
2. Enter the program name under “Shortcut Name”.
3. “Browse” to select the desired, installed program.
4. Click “OK” to confirm your selection or “Cancel” to discard it.
