SHARKOON 4-Port USB-Hub User Manual
Manual
Advertising
1. Switch off your PC and disconnect the power cord.
2. Open the PC case.
3. Remove the 3.5" mounting bay’s front bezel.
4. Slide the USB hub into the mounting bay.
5. Attach the USB hub from both sides inside the mounting
bay using the included screws.
6. Connect the hub’s USB cable to an available USB
connector on the mainboard (for further information
also refer to your mainboard’s manual) and the power
connector to a matching connector of your PSU.
Manual
www.sharkoon.com
USB HUB
Advertising