System setup, 2011 mdx – Acura 2011 MDX User Manual
Page 119
Navigation System
119
System Setup
Switching Display Mode Automatically
I
Recommended Display Mode Day/Night Settings:
• With the headlights on, select mid-range for the dash illumination (see your Owner’s Manual for location of buttons).
• With the headlights off, select mid-range for the dash illumination (see your Owner’s Manual for location of buttons).
• On the SETUP Color adjustment screen, choose white for the map
Day
display and black for the map
Night
display (see
page
). Inappropriate adjustment of these colors can cause the
Day
/
Night
modes to appear inoperative.
llumination control
Priority Operation
But remember
Display Mode
button
(see page
1
Allows selection of
Day
,
Night
, or
Off
display
mode. This button has the highest priority and
overrides all other display control adjustments
listed below.
Once you press this button, you assume full
manual control of the display mode until the
ignition key is cycled again.
Sunlight sensor (middle of
dash near the windshield, see
your Owner’s Manual for
location)
2
If the sunlight sensor detects daylight and the
headlights are turned on, the system
automatically overrides (cancels) the
Night
display and displays the
Day
display mode.
If desired, use the
Display Mode
button
to override this automatic choice.
Dash illumination adjustment
buttons (see the vehicle
Owner’s manual for location)
3
When headlights are turned on, and you wish to
have the
Day
display mode, then adjust the
illumination to the full bright setting (beeps).
Adjust the dash brightness back to mid-range
to allow auto switching by sensing the
headlights are on or off.
Headlights (Auto/On/Off)
4
When turned on, the display changes to
Night
display mode. The previous three controls
listed above can “cancel” this function.
Use the
Display Mode
button
, or
adjust the dash illumination to full bright to set
the display to your desired choice.
Map
Day
/
Night
screen color
choice (see page
Day
and
Night
color choices)
N/A
The user can select the color of the screen that
will be displayed for the
Day
and
Night
display modes described above.
For best contrast, ensure that the map color is
white for
Day
and black for
Night
.
2011 MDX