SHARKOON MS120 - Manual (Page 9)

MS120
6. Installation of a mainboard
1. Unscrew the thumb screws on the back side of the case and remove the left side panel. Lay down the
case sidewise on an even surface.
2. The mounting panel of the mainboard inside the case provides various mounting holes to fix the
standoffs (fig. 3).
Fig. 3
The mainboard contains special screw mounts (fig. 4).
Fig. 4
Place the mainboard to the mounting panel. A standoff must be screwed into every hole on the
mounting panel visible through the mainboard’s screw openings.

9