SHARKOON X-Tatic Analog - Manual (Page 8)

X-TATIC ANALOG
2. Turn the microphone until the indications on the microphone and on the headset are
opposite to each other (fig. 3).
3. Press the microphone’s plug into the headset’s jack completely and turn the micro-
phone to the front and into the desired position.
7. Connecting the headset to a PC or any other analog
source
1. Connect the included power supply to a wall outlet and to the headset’s ISO power
connector.
2. Connect the cable adapter’s 9-pin connector to the according connector of the headset
cable.
3. Connect the X-Tatic Analog’s single 3.5 mm stereo plugs to the respective analog
connector jacks of your PC’s 5.1 sound card (or any other compatible device). For
convenient handling, the connectors are color coded. The headset is ready to use.
fig. 3
20