AMX Kickstand for MVP Touch Panels MVP-KS - Manual (Page 7)

MVP-KS Kickstand
1 MVP-KS Kickstand for MVP Panels
MVP-KS Kickstand
Overview
The optional MVP-KS Kickstand (FG5965-12) is compatible with both MVP touch panel models and
provides the ability to easily rest an MVP on any flat or level surface. The kickstand’s rubber grip
provides traction on smooth surfaces. The MVP-KS mounts to the rear of the MVP by using a set of
alignment guide pins and a retractable latch to secure the kickstand to the rear of the panel.
Specifications
FIG. 1 MVP-KS Kickstand (rear view)
MVP-KS Specifications
Dimensions (HWD): • Fully closed: 6.34" x 7.91" x 0.59" (16.10 cm x 20.10 cm x 1.50 cm)
• Fully extended: 6.34" x 7.91" x 4.17" (16.10 cm x 20.10 cm x 10.60 cm)
Weight: • 0.67 lbs (0.30 kg)
Components: • Retractable Latch: This latch grabs onto the metallic plate located on the
rear of the MVP and secures the MVP-KS to the panel.
• Release Lever: This lever is used to retract the MVP-KS lever and release
the secured MVP touch panel.
• Support Arm: This adjustable support arm is used to provide a level
surface support for any MVP attached to the MVP-KS.
Operating/Storage
Environments: • Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 20% - 85% RH
MVP latch release lever
Retractable latch
Alignment
guide pins
Support arm