SHARKOON Rebel12 Economy - Manual (Page 6)

REBEL12 REBEL12
ENGLISH
19
4. Installation of a mainboard
1. Lay down the opened case sidewise to an even surface.
2. The mounting panel for the mainboard contains drillings to fix the stand-offs. The
mainboard has special, isolated screw openings.
Place the mainboard to the mounting panel and mark the drillings of the mounting
panel which are directly beneath the screw openings.
3. Screw the stand-offs into the marked drillings of the mounting panel.
A
B
B B
B
B
A – Mounting panel for the mainboard with drillings for different mainboard sizes
B – Screwed-in stand-off
4. Screw the mainboard to the stand-offs.
5. Installation of a PSU
1. Put the PSU from the inside against the PSU bracket on the case’s back side.
2. Screw the PSU to the case from the outside. Make sure that the fan(s)/air vent(s) of the
installed PSU are not being covered.
Note:
For fixation matching screws (A) or so called thumb screws (B) can be used.
A
B