SHARKOON Flexi-Drive S2S - Manual (Page 4)

Flexi-Drive S2S
ENGLISH
3
3. Manual
Note:
If you intend to run an operating system on the Flexi-Drive
S2S, we recommend to use SDHC memory cards with SLC
memory and a read/write rate of at least 20 MB/s.
A – Jumper
B – SATA data connector (7-pin)
C – SATA power connector (15-pin)
A – SATA I mode (1.5 Gbit/s)
B – SATA II mode (3 Gbit/s)
A B C