SHARKOON SATA QuickPort Pro LAN - Manual (Page 23)

SATA QUICKPORT PRO LAN
ENGLISH
A – Left-click the link to select the respective entry.
B – To change the current password enter it into the
“Current Password” area, then enter the newly assigned
password into the “New Password” area. Confirm the
new password by re-typing it into the “Confirm New
Password” area. Left-clicking “Submit” will complete
this procedure, “Clear” will abort.
7. Important notes
1. You need to install the server software on every PC, from
which you want to access the SATA QuickPort Pro LAN.
2. Your operating system will treat the connected USB device
as if it was directly connected to the PC. This means that
potential drivers (e.g. printer drivers) need to be installed on
the system (for further details refer to the manuals of the
according devices).
3. As the devices will be handled like directly attached hard-
ware, we suggest to remove memory devices (HDDs, USB
sticks etc.) using the “Safely remove hardware” function
before terminating the connection via “Disconnect”.
The server software will also prompt you with the following
note: