ShelterLogic 14501 ShelterLite Lighting Kit - Manual (Page 2)

05-14501_14502-OB Page 2
1
Fasten light cord to frame with cable ties
Cover not shown for illustrative
purposes. Cover may remain on
during installation
4" loop
1. AttAch LIght cAgeS to frAMe
3. InStALL LIght buLbS. maximum 150 watts
2. Secure LIght corD enDS to frAMe.
4. run eLectIrcAL power to the SheLter
Create a 4" loop or dip in the light
cord that is lower than plug ends to
allow any condensation to flow away.
Run electrical power to shelter using only a uL approved outdoor power cord.
A. Place the power cord under the cover and plug into male end of the ShelterLite cord.
B. Secure any loose cord to the frame with cable ties.