ShelterLogic 25775 10 x 20 MAX AP ENCLOSURE KIT - Manual (Page 3)

05-25775-OB Page 3
10' x 20' 1-3/8" MAX AP - 6 or 8 Leg - Enclosure Kit Parts List - Model #25775
Quantity Part #
Bungee Cords
Description of Parts:
80 10066
2
1
1
Side Walls
Back Panel
Double Zipper Door
10082
10085
10086
NOTES:
• Canopy Enclosure panels attach to frame with bungee cords.
• Leave Canopy Cover bungees in place when attaching Enclosure panels.
CAUTION: Bungee Cords are under extreme tension. Use Caution when installing. Safety glasses are
recommended to prevent injury.
1. ATTACH SIDE WALLS TO FRAME
A. If tightened at corner leg poles, disengage the TwistTite ™ cord and “S” hook from canopy cover and corner
legs. Re-tighten after all Enclosure panels have been secured, as shown in Step 3.
B. Attach the extension panels with bungees to the cross rails at the top first. Adjust the panels as needed to
ensure a tight and even fit before securing to the leg poles.
Side Wall
Panel
10082
Interior view Side Wall Panel Setup
Insert Bungee Cord Through Grommet
Interior view of Canopy Base Feet Exterior view of Canopy Base Feet
Side Wall
Panel
(Interior)
10082
Side Wall
Panel
(Exterior)
10082