Attach enclosure end and zipper door panels, Tighten the cover with twist tite – ShelterLogic 25779 12 x 30 Super Max Enclosure Kit User Manual
Page 4
Advertising
05-25779-0C
Page 4
2. ATTACH ENCLOSURE END AND zIPPER DOOR PANELS
When securing enclosure panels to corner legs, note that each bungee is shared with the neighboring panel.
NOTE:
Door panels zippers must be closed when securing door panel.
Back Panel
10083
One bungee for
both panels.
Side Wall
Panel
10334
3. TIGHTEN THE COvER WITH TWIST TITE
™
A. Wrap the cord with plastic ball and "S" hook at the corners of the cover around the
corner leg poles. Insert "S" hook into the hole of the corner leg poles.
B. Twist each leg pole toward the inside of the shelter until the cover becomes tight
Twist the leg poles equally to ensure the cover stays aligned during tightening.
Twist-Tite
™
Tighten Cover
Advertising