SnowEx OFK-020 - Manual

Optimum Flow Installation Instructions
Step 1: Remove original baffles and plug holes with supplied hardware.
Step 2: Position new style baffle so there are no gaps; baffle is designed to be self locating.
Step 3: Mark and drill holes.
Step 4: Install supplied hardware the same way as original baffle was. Nut and washer should be on exterior surface.
Step 5: Center the Optimum Flow vibrator horizontally and 6-1/2" below apron; (see illustration below) mark and drill holes.
Step 6: Mount vibrator with cord pointing down using supplied hardware. Please note: there is a vibrator backing plate
that must be positioned properly. Please refer to standard vibrator instructions for details regarding harness
installation, etc.
6-1/2”
Cord Facing Down
Optimum Flow Vibrator
Model # OFK-020
See Page 5-30