SnowEx SSH-175 - Manual

© Trynex International 2011
Section 1: Salt Spreader Installation:
Step 1: Remove rear mounting 1/2" bolts (4).
Step 2: Line 4 hole bolt pattern up with D-6298 and D-6298
spreader mounting angle brackets..
Step 3: Install bolts through spreader to mount, leave hardware
loose until all are in place then tighten. Figure B.
Step 4: Refer to spreader owners manual for operation instructions.
This hitch/mount has been designed to be as universal as possible in
regards to fitting a wide variety of skid steer type machines. As with any
attachment, practice safe usage and care when installing and operating
this equipment. Refer to the owners manual for all warning and safety
precautions before using. If you should have any questions or concerns
before using, contact your local dealer for further information.
Figure B
D-6299
D-6298
D-6297
Assembly Instructions
Model # SSH-175