SoleusAir HR1-08R-21 - Manual (Page 7)

7
OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet.
1. Press the POWER button on the heater control panel. Once the power buttons is pressed-in the red power
light will light up. To completely turn the heater off, press the POWER button again.
2. Press the HEAT button on the control panel or remote control to select the desired heating mode. Each
press of the HEAT button will select either the HIGH or LOW heat setting. Pressing the off button on the
remote control will turn off the heating mode, but still allow the unit to stay powered on (indicated by the
Red power light).
3. Press the SWING button on the control panel or remote control to select the oscillation function. Once the
SWING button is pressed, the heater head will oscillate back and forth spreading heat throughout the room.
To turn off the oscillation mode, press the SWING button again.
4. This heater is equipped with a half hour to 7.5 hour auto shut off timer. To operate the timer mode, press
the TIMER button on the control panel or remote control. Each press of the TIMER button will cycle be-
tween the times located on the control panel. If more than one blue timer light is lit, the operation time will
equal the sum of the corresponding numbers. For example: after pressing the TIMER button 3 times, the
0.5 hour timer light and the 1.0 hour timer light will both light up to equal a 1.5 hour time of operation.
5. To turn the unit completely off , press the POWER button on the control panel. The red POWER light will
turn off.
CONTROL PANEL REMOTE CONTROL