SoleusAir FS3-40R-30 - Manual (Page 6)

OPERATING INSTRUCTIONS
Using Fan Controls
1. Set the fan on a stable, level surface.
2. Turn the fan on by pressing the ON/SPEED button located on the control panel or the included Remote
Control.
3. Adjust the speed setting by pressing the ON/SPEED on the control panel or the remote control. This fan
has 3 speed settings. Each press of the ON/SPEED button will change the speed setting on the fan. The
LED lights above the ON/SPEED button will light up when the corresponding speed is selected.
4. To oscillate the fan head, press the SWING button located on the fan control panel or the SWING button
on the remote. Each press of the oscillation button will change the oscillation pattern.
5. This fan includes a 4 hour auto shut-off timer. To operate the timer, press the TIMER button located on
the remote control. Each press of the TIMER button on the remote will change the time for the fan to auto-
matically shut-off. Press the TIMER button once and the fan will be set turn off in one hour. Press the
timer twice and the fan will shut off in two hours, press the timer 3 times and the fan will be set to turn off
in 4 hours.
6. To turn the fan off, press the OFF button on the fan, or the OFF button on the remote control until the unit
turns off.
Adjusting Height and Fan Head Tilt
1. To adjust the height of the fan, turn the fan off and unplug the unit, turn the Adjustable Height Knob (L)
counter-clockwise to loosen the stand. Adjust the fan to the desired height, then firmly tighten to secure
into place.
2. To adjust the tilt on the Fan Head, turn the fan off and unplug the unit, tilt the fan head forward/back by
pulling or pushing the top of the Fan Grill. The fan will make a clicking noise while being adjusted.
6