Spectra Precision MobileMapper 20 - Manual (Page 27)

Engl
is
h
21
Starting a Video
• Tap Camera to turn on the camera. Wait a couple of
seconds until the center of the window displays the
viewfinder of the camera.
• Tap anywhere on the screen to make the task bar visible
at the bottom of the screen
• When you are ready to film, tap Menu and then Video.
• Press the Enter button to start filming.
Ending a Video
• Depending on the video settings, the video camera will
stop filming as explained below:
– With a preset time limit (15 or 30 seconds), the video
camera will stop filming automatically and close the
video file after this time has elapsed. A down counter
under the viewfinder will keep you informed of the
remaining time as you film.
– With no time limit, the video camera will film
indefinitely. A counter under the viewfinder will tell
you the current duration of the video. To stop filming
and close the video file, press the Enter button again.
• At the end of the video shooting, the viewfinder freezes
while the end of the video is being processed.
• Again, tap anywhere on the screen to make the task bar
visible at the bottom of the screen and then tap
OK to turn
off the camera and close the window. The video file you
have created is now listed in the “My Pictures” folder.
Playing Back a Video
• With the “My Pictures” folder open, tap on the desired
video file. This will automatically launch the Windows
Media player.
• Tap to close Windows Media player and return to the
“My Pictures” folder.
Renaming a Video
• With the “My Pictures” folder open, select the desired
video file using the Scroll button.
• Tap Menu, Tools and then Properties.
• Rename the file and tap OK.