Spectra Precision DG511 Underground Laser - Manual (Page 3)

Your job sites involve some of the harshest
conditions found in any industry. You need
equipment that can stand up to corrosion from
acids, chemicals, salts and other destructive
underground elements, as well as to the
physical abuse typical in the construction
industry. The Spectra Precision Laser DG711
and DG511 pipe lasers from Trimble are
designed to meet those conditions.
Built tough for long-lasting performance and
reliability, the DG711 and DG511 pipe lasers
are completely waterproof and designed
to ensure easy cleanup. They are also
easy to assemble with a full range of setup
accessories available, and easy to use with
straightforward, “no-instructions-required”
controls. They even keep track of their own
maintenance needs, notifying you at regular
intervals (you decide how often) when it’s
time for a checkup. The DG711 and DG511
pipe lasers are simply the toughest, smartest
tools you’ll ever own!
SELF-LEVELING: The DG711 and DG511 feature
the largest automatic leveling range in the industry
providing quick, easy setups, regardless of grade.
Unlike traditional pipe lasers, they eliminate the
need for rough leveling and minimize crew training.
Simply set up the laser in the pipe, manhole or
open cut without the need to swivel or rough level
the unit. No need to reset the unit or HI, over the
center point when rough leveling.
LINE ALERT: This unique feature is ideal for
working in high-vibration or wet conditions where
the pipe lasers may be disturbed. The beam
flashes to notify you that the setup line has been
disturbed, eliminating the necessity of rework.
Combined with the self-leveling warning, you’ll
always complete the job correctly, on time and on
budget! Only available on the DG711.
LINE SET: The Line Set/Check capability
of the pipe laser allows you to raise the beam
outside of the trench for fast line setup or
checking. Raising the laser beam out of the trench
to an above-ground stake saves you time—instead
of having to move the excavator off line during
setup of the pipe laser, you can just get on with
your job. In addition, the Line Set-Check feature is
ideal for rechecking the line in pipe jacking puts
after each push. Only available on the DG711.
Our patented Target Lens collects the
beam and transfers the spot up at the
angle viewed by the pipe layer, making
it very easy to see the laser beam.
RUGGED, RELIABLE, REPEATABLE