Star Water Systems S1503 User Manual
Model s1503
© Copyright 2011 Star Water Systems. All rights reserved.
MODEL S1503
Star Model S1503 is a high capacity, high efficiency water
powered back-up system. With no electricity or batteries
required, the S1503 takes over seamlessly when your primary
sump system fails.
The S1503 comes fully assembled for fast, easy and trouble-
free installation. The small footprint allows for installation
in even the smallest sump pits. With superior performance
and discharge capacity, it uses less water and costs less to
operate.
The S1503, installed as a back-up system, does not use any
water until the primary system malfunctions or in the case of
power failure. Water flow is equivalent to a normal faucet and
is required only when the S1503 is operating. Not intended
for use as a primary water removal unit.
COMPARE THESE FEATURES
•
No electricity required
•
Municipal/city water
pressure powered system
•
Removes up to 19 gallons
of water per minute
•
Works during power
failures
•
No battery to charge
•
On guard 24 hours a day
•
Helps eliminate flooding
in basements
•
Ideal standby to an
electric sump pump
•
Can be used with any
existing brand of sump
pump
•
Comes 100% pre-
assembled
•
Small footprint
•
Efficient water usage
•
High capacity, high head
•
Includes push-to-connect
supply fitting (field
installed)
•
Engineered for trouble-
free operation
•
Non-corrosive materials
•
Operates at max. water
pressures up to 80 PSI
•
PVC construction with
corrosion resistant
stainless steel float
rod for maximum
dependability
Primary sump pump
not included.
SW0726 0911
Supersedes 0211
S
TAR
®
U P
C