Star Water Systems SW0004 Star Water Conditioning - Manual (Page 5)

S
TAR
®
5
Single Tank Deluxe Cabinet
Metered “DR” Water Softener
• Patented metered valve regenerates based on actual water usage, saves up to
50% in water and salt by regenerating only when needed.
• Automatic water by-pass for constant household water flow during regeneration.
• Clear water iron removal up to 4 PPM.
• Safety brine overflow protects unit from overflowing, even during power failure.
• Three-year limited warranty on control valve and ten-year limited warranty on
mineral tank. One-year limited warranty on other parts.
DC DR Style
Water Conditioning
Model #
Fleck
Valve
Style
Mineral
Bed
Capacity
Grains
Hardness
Removal
Max. GPG
Iron
Removal
(Clear)¹
Max. PPM
High
Cap.
Resin
cu. ft.
Total Space
Required (In.)
Flow Rates GPM
Salt
Storage
Capacity
Approx.
Ship.
Weight UPC #
Service
Max.²
Backwash
Min.
S07DC24DR 5600DR 24,000 75 4 3/4 14 x 20 x 44 7 2.4 200 lbs 83 lbs 054757000035
S07DC32DR 5600DR 32,000 100 4 1 14 x 20 x 44 8 2.4 200 lbs 98 lbs 054757000042
(¹) Removes iron in solution (Ferrous “clear” iron) up to amounts shown.
(²) Maximum service flow rates thru the softener must never exceed the specified flow rate in gallons per minute.
Valve includes manifold for easy connection. By-pass valve included.
• Digital demand regeneration control valve
features:
- Modular design for easy servicing
- Automatic water by-pass for constant
household flow during regeneration.
- Motorized cycle sequencing which
operates independent of household
water pressure.
• 12-volt electrical transformer guards
against high voltage danger.
• High quality, long lasting mineral for
maximum tannin, hardness and iron
removal.
• Strong corrosion proof fiberglass mineral
tanks made from approved materials.
Also, National Sanitation Foundation
approved. Ten-year limited warranty.
• Corrosion-proof, maintenance-free
polyethylene brine tanks and cabinets
with brine overflow fitting. Made with
FDA approved materials. One-year limited
warranty.
• By-pass valve included for easy installation
and service. S11TS32DR8
UPC #054757034412
Model
No.
Fleck
Valve
Style
Hardness
Removal
Max.
Grains
Tannin
Removal
Max.
PPM
Iron
Removal
(Clear)¹
Max.
PPM
Minerals Total Space Required Flow Rate GPM
Salt
Storage
lbs.
Approx.
Ship Wt.
lbs.
High Cap.
Resin
cu. ft.
Tannin
Anion
Resin cu. ft.
Brine
Tank (In.)
Mineral
Tank (In.)
Service²
Max.
Backwash
Min.
S11TS32DR8 5600SXT 100 4 4 1 1/2 14 x 14 x 34 10 x 44 5.0 2.4 225 94
(¹) Removes iron in solution (Ferrous “clear” iron) up to amounts shown.
(²) Maximum service flow rates thru the softener must never exceed the specified flow rate in gallons per minute.
Tannin / Hardness / Iron Removal System
with Water Efficient Digital Demand Regeneration Control Valve
The removal of organic tannins from water
cannot be accomplished by standard water
filters and softeners. The water usually has a
yellow or brownish cast and the color does
not settle out.
Tannins (or humic acids) are the result of
decayed forest vegetation that is picked up
by surface water and carried to underground
sources. Tannins are organic substances that
are very difficult to remove even by oxidation
and filtration. They can, however, be removed
by the ion exchange principle.
This system is able to remove tannins,
hardness and clear water iron from your water
supply. The substances are pulled out by
special premium grade resins which are easily
regenerated with salt. Use salt containing
iron control agents or packaged iron control
products if iron is present to keep mineral bed
in top condition.
Product may not be exactly as shown.