ANUBIS Typhoon Wireless Access Point - Manual (Page 14)

Typhoon Speednet Wireless Access Point
13
AP Device Manager
When the USB cable is connected, the AP will enter configuration mode. Double-clicking the
icon on the desktop will start the AP Device Manager.
Note: While the AP is in "configuration mode" (when the USB cable is inserted), the AP will not
function in the network. Upon removal of the USB cable, the AP will resume its normal
operation.
After the application starts, it will display a general information screen which provides
information for the current Multimedia and Wi-Fi settings.
l Setting up profiles
- To edit these settings, select either the "Multimedia profile" or "Wi-Fi
profile" from the Profile menu. All relevant settings for both Wi-Fi
and Multimedia mode can be set or modified. Note that the separate
profiles allow for unique settings (i.e. different SSID or network
names) in each mode.
The list below outlines all user-configurable AP settings.