AVerMedia Technologies TV TUNER BOX - Manual (Page 10)

User’s Manual
7
Connecting a Video Source
Composite Video: Connect the video
cable (not supplied) to the video out of
the video device and to the AVerTV
Box3 VIDEO1 IN or VIDEO2 IN port.
Connect the audio cable to the left &
right audio out of the video
device and to the
AVerTV Box3 left &
right AUDIO1 IN or
AUDIO2 IN ports.
S-Video: Connect the s-video cable (not supplied) to the s-video out of the
video device and to the AVerTV Box3 S-Video IN port. If your video player
supports s-video, use this type of connection as s-video provides better
picture quality than composite
video.
Connecting to a Video Output Device
You can output the video
signal from your TV
antenna or video
source (like the
camcorder) to a receiving
device. The receiving device can be a
VCR, video capture card, etc. Simply
connect the receiving device to the
AVerTV Box3 VIDEO OUT port and
left & right AUDIO OUT ports.
NOTE : The AVerTV Box3 provides composite video output only.
S-Video Cable
(not supplied)
Audio Cable
(not supplied)
Video Cable
(not supplied)
Audio Cable
(not supplied)
OUT
Video Game
(e.g. Nintendo ) ®
VCR
Camcorder
Example:
Video & Audio Cable
(not supplied)
OUT
Video Game
(e.g. Nintendo ) ®
VCR
Camcorder
Example:
Video & Audio Cable
IN E x a m p l e :
Videotape
Hard disk
CR or any
storage disk
VCR
PCI Video
Capture Card
Computer
L
R