Replacement parts, Shelf adjustment, View from beneath – Tennsco J1878SU User Manual
Page 2: Leveling the cabinet, For storage cabinet for locking handle
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:
Model Number (J1878SU)
Purchase Date
Description of part(s) needed and part
Your company name
number(s) as shown in Parts List (above)
Contact person's name
Color (i.e. Medium Grey, etc.)
Who the product was purchased from
Was item missing, or was it damaged?
Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888
Customer Service: (866) 446-8686
Fax: (866) 445-7260
If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.
Shelf Adjustment
1. Using a flat-head screw-
driver, gently pull the lock-
ing tab away from the hole
in the shelf edge. This will
allow the shelf to be re-
leased and lifted from the
tab.
2. Place the shelf at the
desired level.
3. Insert the shelf edges into
the tabs at the new location.
Be sure that the shelf is
securely fitted into the tabs
at all points of contact.
View from beneath
Shelf
306
Door (left)
056LD
Door (right)
056RD
Hinge Pin
944HP
PART DESCRIPTION
REPLACEMENT PARTS
PART NO.
For Storage Cabinet
For Locking Handle
PART DESCRIPTION
PART NO.
Lock Bar Set
043LB
Locking Handle w/keys and hardware
043LH
Dummy Handle
043DH
Locking Cam*
944LC
Cam Retainer*
944CR
Lock Bar Guide Insert*
944GI
*Included in Locking Handle w/keys and hardware (part no. 043LH). May be ordered alone or as part of the full hardware set.
Leveling the Cabinet
1. If cabinet doors don't open
and close easily, unit likely
needs leveling.
2. Open the cabinet doors and
locate the leveling hole on
each side of the cabinet
base.
3. Insert a flathead screwdriver
into each leveling hole, and
turn the screw until leveler
is at the desired position.
4. If leveled properly, doors
should open and close
freely.
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged. However, should
your unit contain missing or damaged parts, replacements may be obtained directly from us. To obtain proper replacement
parts follow the instructions below, or fill out the form at www.tennsco.com/partsorder.html.
Insert screwdriver
through hole (above) to
adjust leveler (below).
View from underside
of cabinet