Avital AMX58 - Manual (Page 7)

n User Programmable Passive Door Locking — The system will
not automatically lock the doors when the alarm passively arms to
prevent the keys and remote from accidentally being locked in the
vehicle. If you prefer, you can easily program the alarm to automatically
lock the doors every time the alarm passively arms. See the
“Programming Table for Alarm Features” on page 8.
n To Activate Remote Panic — Press and hold button #1 for 3-4
seconds. The siren will sound continually and the parking lights will
flash on and off. If the ignition key is off, the doors will unlock. If the
ignition key is on, the doors will lock. To deactivate, press button #1
once (may require additional relays).
n LED Status Indicator — The LED on your vehicle’s dashboard or
center console will inform you of the system status.
LED Status
Off System is disarmed
On solid In valet mode
Slow flash System is armed
Flashing in cycles See specific intrusion identification
n Previous Intrusion Alert — If the vehicle had been tampered with
and the alarm has been triggered, the siren will chirp 3 times upon
remote disarm instead of the usual 1 chirp.
n Specific Intrusion Identification — If the alarm had been triggered
in your absence, the siren will chirp 3 times upon remote disarm
(Previous Intrusion Alert). When you enter the vehicle and turn on the
ignition, the LED will flash in cycles to specifically identify which zone
has triggered the alarm.
LED Triggered
One Flash...One Flash... Impact sensor
Two Flash...Two Flash... Hood trunk trigger
Three Flash...Three Flash... Door trigger
6
Tornado 2 /AMX58 Owner's Manual 12/29/97